联系我们
名称：硅质板诚信厂
电话：xxx
手机：xxx
邮箱：xxx
地址：xxx
新闻动态
复合A级硅质保温板应用优势
复合A级硅质保温板应用优势
Application advantages of composite class a silicon insulation board
1.不可燃，该产品是采用特种无机不燃矿物纤维制成，防火等级为A1级。
1. Nonflammable. The product is made of special inorganic nonflammable mineral fiber, with the fire protection grade of A1.
2.耐高温:1300度灼烧一小时，物理性质不发生改变，不变形;化学性质也不发生变化，过火后，依然可以继续使用。
2. High temperature resistance: when it is burned at 1300 ℃ for one hour, its physical properties will not change and it will not deform; its chemical properties will not change, and it can still be used after being burned.
3.节能:导热系数为0.048-0.058，拉拔强度在0.2左右，抗压强度在0.47左右，吸水率在8%左右，容重从80公斤到170公斤，根据需要轻重可调，建议在150左右。
3. Energy saving: the thermal conductivity is 0.048-0.058, the drawing strength is about 0.2, the compressive strength is about 0.47, the water absorption is about 8%, and the unit weight is from 80kg to 170kg. It can be adjusted according to the needs, and it is suggested to be about 150.
4.环保:在生产过程中不会产生废料、废水、废气。在大火燃烧时无烟无味，生产过程中产生的边角料还可以重复利用。从业人员不会造成矽肺，而且对周围环境没有危害。
4. Environmental protection: no waste, waste water or waste gas will be produced in the production process. It is smoke-free and tasteless when burning in the fire, and the leftovers produced in the production process can also be reused. Employees will not cause silicosis, and there is no harm to the surrounding environment.
5.易加工生产:生产工艺简单，易学，4小时可以学会，生产效率高，单条生产线一天生产100立方，生产效益高。
5. Easy to process production: the production process is simple, easy to learn, and can be learned in 4 hours, with high production efficiency. A single production line can produce 100 cubic meters a day, with high production efficiency.
6.施工方便:该板材与挤塑板、聚苯板等施工工艺，施工程序没有区别，可以粘、钉、锯、刨、磨，不用重新培训技术人员。
6. Convenient construction: there is no difference between the construction process of the board and Extrusion board, polystyrene board, etc. the construction process can be glued, nailed, sawed, planed and ground without retraining the technical personnel.
Application advantages of composite class a silicon insulation board
1.不可燃，该产品是采用特种无机不燃矿物纤维制成，防火等级为A1级。
1. Nonflammable. The product is made of special inorganic nonflammable mineral fiber, with the fire protection grade of A1.
2.耐高温:1300度灼烧一小时，物理性质不发生改变，不变形;化学性质也不发生变化，过火后，依然可以继续使用。
2. High temperature resistance: when it is burned at 1300 ℃ for one hour, its physical properties will not change and it will not deform; its chemical properties will not change, and it can still be used after being burned.
3.节能:导热系数为0.048-0.058，拉拔强度在0.2左右，抗压强度在0.47左右，吸水率在8%左右，容重从80公斤到170公斤，根据需要轻重可调，建议在150左右。
3. Energy saving: the thermal conductivity is 0.048-0.058, the drawing strength is about 0.2, the compressive strength is about 0.47, the water absorption is about 8%, and the unit weight is from 80kg to 170kg. It can be adjusted according to the needs, and it is suggested to be about 150.
4.环保:在生产过程中不会产生废料、废水、废气。在大火燃烧时无烟无味，生产过程中产生的边角料还可以重复利用。从业人员不会造成矽肺，而且对周围环境没有危害。
4. Environmental protection: no waste, waste water or waste gas will be produced in the production process. It is smoke-free and tasteless when burning in the fire, and the leftovers produced in the production process can also be reused. Employees will not cause silicosis, and there is no harm to the surrounding environment.
5.易加工生产:生产工艺简单，易学，4小时可以学会，生产效率高，单条生产线一天生产100立方，生产效益高。
5. Easy to process production: the production process is simple, easy to learn, and can be learned in 4 hours, with high production efficiency. A single production line can produce 100 cubic meters a day, with high production efficiency.
6.施工方便:该板材与挤塑板、聚苯板等施工工艺，施工程序没有区别，可以粘、钉、锯、刨、磨，不用重新培训技术人员。
6. Convenient construction: there is no difference between the construction process of the board and Extrusion board, polystyrene board, etc. the construction process can be glued, nailed, sawed, planed and ground without retraining the technical personnel.
