| A级硅质改性保温板有哪些优势特点？ |
| 添加时间：2019/1/25 16:24:55 浏览次数： |
| A级硅质改性保温板有哪些优势特点？ What are the advantages and characteristics of grade A silicon modified insulation board? 1.不可燃，该产品是采用特种无机不燃矿物纤维制成，防火等级为A1级。 1. Non-flammable, the product is made of special inorganic non-flammable mineral fibers, fire protection grade A1. 2.耐高温：1300度灼烧一小时，物理性质不发生改变，不变形；化学性质也不发生变化，过火后，依然可以继续使用。 2. High temperature resistance: 1 300 degree burning for an hour, the physical properties do not change, do not deform; chemical properties do not change, after fire, can still be used. 3.节能：导热系数为0.048-0.058，拉拔强度在0.2左右，抗压强度在0.47左右，吸水率在8%左右，容重从80公斤到170公斤，根据需要轻重可调，建议在150左右。 3. Energy-saving: thermal conductivity is 0.048-0.058, drawing strength is about 0.2, compressive strength is about 0.47, water absorption is about 8%, bulk weight is from 80 kg to 170 kg, adjustable according to the need, the proposal is about 150. 4.环保：在生产过程中不会产生废料、废水、废气。在大火燃烧时无烟无味，生产过程中产生的边角料还可以重复利用。从业人员不会造成矽肺，而且对周围环境没有危害。 4. Environmental protection: No waste, waste water or waste gas will be produced in the production process. When the fire burns, it is smokeless and tasteless, and the edges and corners produced in the production process can be reused. Employees do not cause silicosis and do no harm to the surrounding environment. 5.易加工生产：生产工艺简单，易学，4小时可以学会，生产效率高，单条生产线一天生产100立方，生产效益高。 5. Easy-to-process production: simple production process, easy to learn, 4 hours can learn, high production efficiency, a single production line to produce 100 cubic meters a day, high production efficiency. 6.施工方便：该板材与挤塑板、聚苯板等施工工艺，施工程序没有区别，可以粘、钉、锯、刨、磨，不用重新培训技术人员 6. Convenient construction: There is no difference in construction procedure between the sheet and Extrusion board or polyphenyl board. It can be bonded, nailed, sawed, planed and ground without retraining technicians. |
| 上一页 硅质改性聚苯板 |
| 下一页 没有了 |